A classic Fleur de Lys railhead sits atop the round vertical bars. Some of the verticals are finished off with decorative triple bushes. Please note that these railheads are gently pointed and do not have a safety top (small ball). If you require a safety top (small ball on top of the railhead) please see GRD 1 in our Select Range.
The gates come in a matte black painted finish as standard complete with a flip latch and adjustable eye bolts. Please note we do not supply any nuts or bolts required for fixing your ironworks into brickwork, stonework or the ground. We advise you to buy these locally as there are many different types according to the materials to which the ironworks are to be fitted.
Included with Windsor Double Gates
Included with Windsor Double Gates
- Adjustable eye bolt
- Lockable drop bolt
- Slide bolt
- Nuts and bolts required to bolt your gates into place
We do not supply bolts or screws necessary for installing ironworks to your specific brickwork/masonry/woodwork. We advise that you buy these locally to suit your application.
Optional extras available to order at additional cost include
- 5 Lever Mortice Lock (Click to order for £110.00)
- Hot dip galvanizing (please select prior to checkout)
- Powder coating (please select prior to checkout)
All gate sizes quoted are gap sizes not actual gate sizes so please measure from brick to brick and we will calculate all allowances for brackets, hinges, clearances etc. before we make your gates. Please see How to Measure Accurately for further advice before placing your order. If you cannot see the size you need please contact us with the dimensions you require and we will prepare a quote for you. We make bespoke sizes without the high price tag so often associated with made to measure products. For example if you require double gates measuring 1150mm high x 2438mm wide we would only charge you for 1220mm high x 2438mm wide (the next size up in our price band).
If you require gate posts please click here to order.
Gates with 12mm Vertical Bars
Made to order using 12mm solid round vertical steel bars spaced at 100mm intervals (4″). The framework is made using 30mm x 8mm flat bar for top and bottom horizontal rails, and 30mm SHS (Square Hollow Section) steel for the vertical side rails. The Fleur de Lys railheads measure 130mm high x 60mm wide. The triple bushes measure 65mm high x 40mm wide.
Gates with 16mm Vertical Bars
Made to order using 16mm solid round vertical steel bars spaced at 100mm intervals (4″). The framework is made using 40mm x 8mm flat bar horizontal cross rails and 40mm SHS steel for the vertical side rails. The Fleur de Lys railheads measure 155mm high x 70mm wide. The triple bushes measure are 80mm high x 50mm wide.
Also included free of charge is a fixing kit comprising brackets, hinges, latches, nuts, bolts and a drop bolt.
Please note that we make the 914mm (3ft) and 1220mm (4ft) high gates with one row of decoration (above left) and the 1830mm (6ft) high metal gates with two rows of decoration (shown above right).
Please see information below on the different finish options available.
Matte Black Painted Finish – Standard Finish
This is a good quality spray painted primer designed to act as a base coat for finishing by the customer with paint suitable for exterior metal surfaces. Please note that this primer alone is not weatherproof and will need to be painted before attaching any fixings or placing outdoors. If you require rustproof protection we would recommend hot dip galvanizing and powder coating. Unless your ironworks are galvanized rust will begin to show through over time. This is not a fault but is a natural trait of steel.
Hot Dip Galvanizing
This is a protective coating that is carried out to British Standard BS EN ISO 1461. It provides rustproof protection for 70 years. Please note that hot dip galvanized products have a bright silver/grey appearance that, if left unpainted, will weather over time. Our galvanized products may have a slightly uneven colour and texture due to the fine finishing we carry out by hand which we call linishing. We do this to smooth out small burrs or shards of zinc that naturally occur during the galvanizing process. This does not diminish the protective properties provided by the galvanizing. Please bear this in mind if you order galvanized only products that you are not going to paint.
If you would like a black finish you can either coat them with paint suitable for exterior metal surfaces or choose powder coating, black satin as standard, prior to checkout. Other colours of powder coating are available on request, please email us with your requirements.
Provides a much harder finish than conventional paint. Our powder coating is applied to an average thickness of 80 microns, exceeds the industry standard of 60 microns and complies with British Standards BS EN ISO 13438. Comes in a high quality black satin finish giving a lustrous sheen. Other colours of powder coating are available on request, please email us with your requirements.
Unless your ironworks are galvanized first rust will begin to show through over time though this may not happen for several years depending on the surrounding environment. This is not a fault but is a natural trait of steel and any rust spots that appear on powder coated goods can be sanded down and touched up with paint suitable for exterior metal surfaces.