Standing at a statuesque 170mm high this elegant and gently pointed railhead is finished off with a curvy swirl at each side near the base. Offers just enough detail to be discreetly decorative. Our wrought iron railings are finished in a black satin powder coating as standard or why not upgrade to our top specification hot dip galvanized and powder coated option for a maintenance free finish.
All sizes quoted are gap sizes not actual railing sizes so please measure from brick to brick and we will calculate all allowances for brackets, hinges, clearances etc. before we make your railing. Please see How to Measure Accurately for further advice before placing your order. If you cannot see the size you need please contact us with the dimensions you require and we will prepare a quote for you. We make bespoke sizes without the high price tag so often associated with made to measure products. For example if you require railing at 610mm high x 1450mm wide the cost would be for 610mm high x 1524mm wide (the next size up in our price band).
If you require railing posts please click here to order.
Included with Hepburn Railings
Made to order using 20mm solid round vertical steel bars spaced at 100mm (4”) intervals and 40mm x 10mm flat bar horizontal top and bottom rails. The railhead measures 170mm high and is set on a 20mm round base.
Also included free of charge is a fixing kit comprising nuts, bolts, washers and brackets required to bolt your railing panels in place (not supplied are bolts/screws necessary for installing ironworks to your specific brickwork/masonry/woodwork).
Please see information below on the different finish options available.
Hot Dip Galvanizing
This is a protective coating that is carried out to British Standard BS EN ISO 1461. It provides rustproof protection for 70 years. Our top specification finish is hot dip galvanized and black satin powder coated. Other colours of powder coating are available on request, please contact us with your requirements and we will quote accordingly.
Provides a much harder finish than conventional paint. Our powder coating is applied to an average thickness of 80 microns, exceeds the industry standard of 60 microns and complies with British Standards BS EN ISO 13438. Comes in a high quality black satin finish giving a lustrous sheen. Other colours of powder coating are available on request; please contact us with your requirements.
Unless your wrought iron products are galvanized first rust will begin to show through over time though this may not happen for several years depending on the surrounding environment. This is not a fault but is a natural trait of steel and any rust spots that appear on powder coated goods can be sanded down and touched up with paint suitable for exterior metal surfaces.