Wrought Iron Railing Posts

Our railing posts are made to order using 50mm square hollow section (SHS) steel.  They are available as corner posts, end posts and intermediate posts for either bolting down or concreting into the ground.  Shown here is our Railing Intermediate Post with a base plate for bolting down.  Supplied with a flat steel top as standard.  Click here to see our range of decorative post tops.

The bolt down option has a 150mm square base plate whilst the concrete in posts are made 450mm longer at the bottom for sinking into the ground.  For example a post to suit railing of 914mm high will be supplied at 1364mm long.
If you prefer a more seamless look to your railings, we also make narrower posts from 30mm SHS which can be topped with a railhead to match your railings.

Please ask us about narrower posts and we will provide an itemised quote.
All posts are supplied in a black matte painted finish (primer/undercoat) as standard.  Hot dip galvanizing and powder coating available at extra cost, please select finish required prior to checkout.

Finishes

Matte Black Painted Primer – Standard Finish

This is a good quality spray painted primer designed to act as a base coat for finishing by the customer with paint suitable for exterior metal surfaces. Please note that this primer alone is not weatherproof and will need to be painted before attaching any fixings or placing outdoors. If you require rustproof protection we would recommend hot dip galvanizing and powder coating. Unless your ironworks are galvanized rust will begin to show through over time. This is not a fault but is a natural trait of steel.

Hot Dip Galvanizing

This is a protective coating that is carried out to British Standard BS EN ISO 1461. It provides rustproof protection for 70 years. Please note that hot dip galvanized products have a bright silver/grey appearance that, if left unpainted, will weather over time. Our galvanized products may have a slightly uneven colour and texture due to the fine finishing we carry out by hand. We do this to smooth out small burrs or shards of zinc that naturally occur during the galvanizing process. This does not diminish the protective properties provided by the galvanizing. Please bear this in mind if you order galvanized only products that you are not going to paint.

If you would like a black finish you can either coat your product with paint suitable for exterior metal surfaces, or choose powder coating, black satin as standard, prior to checkout. Other colours of powder coating are available for a surcharge, please email us with your requirements.

Powder Coating

Provides a much harder finish than conventional paint. Our powder coating is applied to an average thickness of 80 microns, exceeds the industry standard of 60 microns and complies with British Standards BS EN ISO 13438. Comes in a high quality black satin finish giving a lustrous sheen. Other colours of powder coating are available for a surcharge, please email us with your requirements.

Unless your ironworks are galvanized before powder coating, rust will begin to show through over time though this may not happen for several years depending on the surrounding environment. This is not a fault but is a natural trait of steel and any rust spots that appear on powder coated goods can be sanded down and touched up with paint suitable for exterior metal surfaces.